How To Remove CPU From Motherboard: A Complete Guide

Photo Source:

The hardware within a computer known as a CPU (Central Processing Unit) performs the fundamental arithmetic, logic, control, and input/output (I/O) activities required by the instructions to carry out computer programs. The central processor unit (CPU), random access memory (RAM), non-volatile storage devices (ROM), and various input/output (I/O) interfaces are all housed on a motherboard. The word “motherboard” refers to a computer’s primary circuit board.

If you’re like most people, you probably don’t give much thought to the inner workings of your computer. But if you want to take advantage of all that your computer has to offer, it’s important to understand at least the basics of how it works. In this article, we’ll show you how to remove the CPU from your motherboard.

How To Remove CPU From Motherboard

Photo Source:

Things You’ll Need:

  • Phillips screwdriver
  • Flathead screwdriver
  • Anti-static wrist strap (optional)
  1. Unplug the power cord from the back of the computer and press the power button to discharge any residual electricity in the components.
  2. Remove the side panel from the computer case. Refer to your computer manual for instructions on how to do this, as it will vary depending on the make and model of your case.
  3. Locate the CPU socket on the motherboard. This is usually denoted by a large, square chip with numerous metal pins protruding from it.
  4. Place one hand on each side of the chip and gently rock it back and forth until it pops out of its socket. If you feel resistance, check to see if you’ve missed a screw or latch that is still holding it in place.
  5. Inspect the socket for any foreign objects such as hair, dust, or lint. Use a can of compressed air to blow out the socket if necessary.
  6. Line up the notches on the bottom edge of the CPU with the notches in the socket. Gently lower the CPU into place and press down until it clicks into place.
  7. Replace the side panel on the computer case and screw it back into place.
  8. Reconnect the power cord to the back of the computer and press the power button to turn it on. Verify that everything is working properly before continuing to use your computer.

Be sure to exercise caution when handling the CPU, as it is a delicate component. Avoid touching any of the exposed metal pins on the underside of the CPU, as this can damage the processor. Once you have removed the CPU from its socket, you can proceed with the rest of your motherboard upgrade or repair.

You can find more information about removing the CPU from the motherboard in your computer’s user manual. If you are unsure about any of the steps involved in this process, please consult a qualified computer technician before proceeding.

Advantages Of Removing CPU From Motherboard

Photo Source:

If you’re looking to upgrade your CPU, or if you’re having trouble with your current one, you may be wondering how to remove the CPU from your motherboard. It’s not as difficult as it may seem, and there are a few advantages to doing so.

For one, removing the CPU allows you to clean the area around it. This is especially important if you’re upgrading to a new CPU, as you don’t want any old thermal paste or dust interfering with the new chip. Additionally, removing the CPU gives you a chance to inspect it for any damage that may have occurred.

Finally, removing the CPU can also help improve airflow in your case. If your CPU is located in a particularly tight spot, or if there’s a lot of dust buildup around it, removing the chip can help improve airflow and keep your system cooler.

Additional Tips On Removing CPU From Motherboard

Photo Source:

When you are removing the CPU from the motherboard, it is important to be extra careful. Make sure that you unplug all of the cables and wires that are connected to the motherboard before you attempt to remove the CPU. It is also a good idea to have a static-free work area when you are performing this task.

If you are not comfortable working with computers, it is probably a good idea to hire a professional to do this job for you. They will know exactly how to safely remove the CPU from the motherboard without damaging any of the components. With a little bit of patience and a steady hand, you should be able to do it without any problems. Just make sure that you follow the steps carefully and take your time.


Removing the CPU From Motherboard is not a very difficult task but it is a very important one. There are only a few steps that are required to be followed to remove the CPU from the motherboard. Make sure that you have all the required tools and parts before starting the process. Take your time and follow every step carefully to avoid any damage to the parts. Thanks for reading!



Leave a Comment